POLYUR 102 DTM POLYASPARTIC |
|
POLYUR 102 DTM is a high gloss two-component aliphatic polyaspartic polyurethane. It is used as a high build direct-to-metal (DTM) finish. It offers an excellent gloss and color retention as well as excellent corrosion protection.
|
POLYUR 104 DTM POLYASPARTIC |
|
|
POLYUR 104 DTM is a high gloss two-component aliphatic polyaspartic polyurethane, that is suitable to be used as a high build direct-to-metal (DTM) finish. It offers an excellent gloss and color retention as well as excellent corrosion protection.
| FEATURES |
RECOMMENDED USES |
- Apply one coat directly to steel
- Excellent gloss and color retention
- Tough hard film
- Excellent chemical and corrosion resistance
- Excellent abrasion resistance
- Can be applied with a high build, up to 312 microns
(12.5 mils) wet
- Contains anti-corrosive pigments without heavy metals
- Suitable for use with plural-component spray equipment
- Can be apply over zinc rich primer for extra corrosion protection
|
- Mobile and agricultural equipment
- Structural steel
- Storage tanks and reservoirs
- Flat beds
|
POLYUR 346 SERIES URETHANE TOPCOAT |
|
POLYYUR 346 SERIES is a multi-purpose, two component, high gloss, aliphatic polyurethane topcoat. Suitable for areas and structural surfaces where good gloss and color retention are required.
| FEATURES |
RECOMMENDED USES |
- Excellent drying time
- Excellent gloss and color retention
- Excellent weathering and U.V. resistance
- Superb chemical resistance
- Red and yellow base are available
|
- Original Equipment Manufacturers (OEM)
- Heavy duty equipment
- Tanks, pumps, transformers
- Agricultural equipment
- Storage tanks and reservoirs
- Steel structures
|
POLYUR UP SERIES URETHANE TOPCOAT |
|
POLYUR UP SERIES is a two component high-performance and high gloss aliphatic acrylic polyurethane. It provides outstanding gloss and color retention and provides excellent chemical, abrasion and impact resistance.
| FEATURES |
RECOMMENDED USES |
- Excellent drying time
- Remarkable gloss and color retention
- Excellent abrasion and impact resistance
- Excellent weathering and U.V. resistance
- Superb chemical resistance
- Heat resistant up to 80°C (176°F)
- A library of Industrial and Automotive colors available
- An Intermix set-up available for both solid and metallic colors
- Color matching service is available to support your needs
|
- Original Equipment Manufacturers (OEM)
- Trucks, railcars, and locomotives (transportation)
- Heavy duty equipment
- Tanks, pumps, transformers
- Mobile and agricultural equipment
- Storage tanks and reservoirs
- Steel structures
|
POLYUR 8000 SERIES URETHANE TOPCOAT |
|
POLYUR 8000 SERIES is a two component high-performance and high gloss aliphatic acrylic polyurethane. It provides outstanding gloss and color retention and provides excellent chemical, abrasion and impact resistance.
| FEATURES |
RECOMMENDED USES |
- Excellent drying time
- Remarkable gloss and color retention
- Excellent abrasion and impact resistance
- Excellent weathering and U.V. resistance
- Superb chemical resistance
- Heat resistant up to 80°C (176°F)
- A library of Industrial and Automotive colors available
- An Intermix set-up available for both solid and metallic colors
- Color matching service is available to support your needs
Also available in semi-gloss version using a 3:1 ratio.
|
- Original Equipment Manufacturers
- Trucks, railcars, and locomotives (transportation)
- Heavy duty equipment
- Tanks, pumps, transformers
- Mobile and agricultural equipment
- Storage tanks and reservoirs
- Steel structures
|
POLYUR 390 MC ALUMINUM ZINC PRIMER |
|
POLYUR 390 MC is specially formulated for application where proper surface preparation cannot be achieved. Typical uses include; pulp and paper mills, tanks (exterior), trucks, truck frames, rail cars and any steel structure exposed to rough atmospheric conditions.
| FEATURES |
RECOMMENDED USES |
- Mixture of Mio/Zinc/Aluminum for high corrosion protection
for overcoating system
- Excellent adhesion to tightly adhering rust on steel
- Can be applied over damp/cold surfaces
- Can be applied at a minimum of -5°C (23°F)
- Rapid overcoating time
- Does not become brittle with age
- Excellent abrasion and corrosion resistance
- Cures in less time than conventional primers
- Contains 12% of zinc in the dry film
|
- Pulp and paper mills
- Steel structure exposed to rough atmospheric conditions
- Rail cars
|
