- Outstanding impact resistance
- Excellent flexibility under extreme cold temperatures
- Provides an excellent waterproof protection on rigid
urethane insulation
- Protective membrane on metal, masonry, wooden
reservoirs, silos and many kinds of pipes and stone slabs
- Application on geotextile to form ponds, to retain overflow,
prevent effluent leakage, water and petroleum product leakage
- Repair or replace existing membranes
- Excellent abrasion resistance
- Rubberized membrane with excellent elongation
|
- Excellent for garage and parking decks
- Can be used for truck bed liners
- Containment and secondary containment floors
- Material handling equipment
- Gravel guard application
- Can be used to repair or replace an existing membrane
- Roofing applications
- Pulp and paper mills
- Pipes
|
POLYFLEX 402 is a high-performance polyurea membrane. Extended gel time providessuperiorleveling, ideal for flooring applications. It provides excellent abrasion and waterproofing protection. Available in a variety of colors.
 FEATURES |
RECOMMENDED USES |
- Protectivemembrane on metal, masonry, wooden
reservoirs, silos and many kinds of pipes and stone slabs
- Provides an excellent waterproof protection
- Optimum leveling
- Can be applied with a low pressure spray machine with
static mixer
- Specially developed for industrial floors
- Excellent hardness
|
- Excellent for garage and parking decks
- Truck bed liners
- Industrial floors with chemical resistance
- Repair or replace an existing membrane
- Excellent for industrial floors
|
POLYFLEX PW is a NSF61 CERTIFIED high-performance Polyurea lining for use on both steel and concrete water tanks. Polyflex PW offers superior service life in a variety of climatic conditions for potable water. RAPID RETURN TO SERVICE.
| FEATURES |
RECOMMENDED USES |
- Specially designed for piping and tanks that contain potable,
fresh and salt water
- Superior anti-corrosive protection for steel
- Protective membrane on metal, masonry, wooden
reservoirs, silos and many kinds of pipes and stone slabs
- Results in a smooth seamless membrane &aesthetic surface
- Repair or replace existing membranes
- Application on geotextile to form ponds, to retain overflow,
prevent effluent leakage, water and petroleum product leakage
- Approved by NSF61
- Back to service in as little as 24 hours
- NO VOC’s and low odor
|
- Potable water tank linings
- Water and waste-water treatment plants
- Food processing Facilities
- Pulp and paper mills
- Corrosion protection for steel
- Chemical Processing Facilities
- Pipe linings
- Refineries
|
POLYFLEX 53 AQUA-GUARD plus |
|
POLYFLEX 53 is a high-performance Polyurethane – Polyurea Thick Elastomeric coating that was specially designed in order to provide high waterproofing performance by regularmethods of application.
| FEATURES |
RECOMMENDED USES |
- High hydro insulation and waterproofing
- Good elasticity and flexibility
- High film build in one coat
- Can be used for full coating, repair kit, bonding layer
- Applied by brush, roller squeegee and airless or
conventional spray
- Cold weather cure for temperatures down to -10°C (15°F)
- Excellentimpact resistance
- Can be used as a crack filler when mixed with sand
|
- Waterproofing of concrete, wooden surfaces and industrial
civilian buildings
- Self-leveling & crack filling floor application
|
POLYFLEX 54 CORRO-SHIELD plus |
|
POLYFLEX 54 is a high-performance Polyurethane – Polyurea Iron Oxide based Elastomeric coating specially designed to provide a superior anticorrosion performance by regular methods of application.
| FEATURES |
RECOMMENDED USES |
- Excellent anti-corrosion and hydro insulation characteristics
- High film build in one coat
- Applied by brush, roller, squeegee and spray by
conventional or special plural component spraying equipment XM XTREEM
- Outstanding hardness
- Excellent hydrophobic and waterproofing performance
- Cold weather cure for temperatures down to -10°C (15°F)
- Good abrasion resistance
- Chemical resistance to low concentrated acids and alkaline
|
- Long term protection of steel and concrete surfaces against corrosion
- Effective anticorrosion protection on exterior parts of pipes and tanks
|
POLYFLEX 55 ULTRA-CHEM plus |
|
POLYFLEX 55 is a high-performance Polyurethane – Polyurea Highly Crosslinking Elastomeric coating specially designed to provide a superior chemical and abrasion resistant performance by regular methods of application.
| FEATURES |
RECOMMENDED USES |
- Excellent chemical resistance
- High film build in one coat
- Can be used for full coating or as a repair kit
- Applied by brush, roller, squeegee and spray by conventional or plural component spraying equipment Graco XM pump
- Exceptional hardness and toughness
- Excellent hydrophobic & water proofing performance
- Cold weather cure for temperatures down to -25°C (-13°F)
- Excellent wear/abrasion resistance
|
- Protection on steel and concrete surfaces from occasional splashing of chemicals
- Interior lining of tanks and pipes
- Chemical resistant flooring
- Protection of mining equipment from abrasion wear and chemicals
|
POLYFLEX 56 UV-SHIELD plus |
|
POLYFLEX 56 is a high-performance Aliphatic Polyurethane – Polyurea Thick Elastomeric coating that was specially designed in order to provide a superior UV-resistant performance by regular methods of application.
| FEATURES |
RECOMMENDED USES |
- Superior UV-resistance
- Excellent color and gloss retention
- High film build in one coat
- Can be used for full coating or repair kit
- Applied by brush, roller squeegee and airless or conventional spray
- Exceptional hardness and toughness
- Excellent hydrophobic and water proofing performance
- Cold weather cure for temperatures down to -10°C (14°F).
- Excellent impact resistance
- Good abrasion resistance
|
- Protection of steel and concrete surfaces against weathering
- External protection of pipes and tanks
- Water proofing of industrial and civilian buildings
- Hydro insulation of diverse concrete and wooden facilities
- Industrial and commercial flooring with excellent Indoor and outdoor color stability
|
POLYFLEX 448 HI-BUILD EPOXY |
|
POLYFLEX 448 is a two-component high build modified Polyamine Epoxy. It can be used as a high-performance primer in immersion and for the following applications: properly prepared steel, intermediate coat, for field or for shop applications. It can also be used for roughened galvanized or roughened stainless steel surface.
| FEATURES |
RECOMMENDED USES |
- No induction time
- High film build 10 - 15 mils D.F.T (250 - 375 microns)
- Excellent adhesion to blasted steel or concrete
- Excellent adhesion to tightly adhered rust
- Fresh and salt water resistant
- Can be recoated with itself
- Excellent chemical resistance: resists splash and spillage of alkalis, greases, salts and oil
- For long term color and gloss retention use aliphatic polyurethane topcoat 8000 series
- Excellent corrosion resistance
- Surface tolerant
|
- Bridges and high-performance architecture
- Piping and tanks
- Pulp and paper mills
- Chemical plants and refineries
- Water and wastewater treatment facilities
- Mining and fertilizer plants
|
MONO FERRO PUR MIO PRIMER |
|
Micaceous iron oxide (MIO)-pigmented, one-component, moisture-cure polyurethane used as a primer, Intermediate coat or "overcoat" over aged alkyds, vinyls, or epoxies. Can also be applied over SSPC-SP-2, SP-3 SP-6 or SP-11 surface preparations. May also be used as a non-lightstable topcoat.
| FEATURES |
RECOMMENDED USES |
- Can be used as spot or full primer and as an interior topcoat
- Application in damp, cold, humid, or foggy conditions
- Application directly to steel, aluminum, or galvanized metal
- Intermediate coat over Xymax® Mono Zinc ME III, Mono Zinc, Mono Zinc 390, Mono Lock PP, Xyguard or itself
- Excellent overcoat for aged alkyds, epoxies, and vinyls
- May also be applied directly to concrete
- Can be applied at a minimum of -7°C (20°F) and humidity up to 99%; no dew point temperature differential restrictions
- May be used as a field touch-up over inorganic zinc
- Excellent adhesion properties to tightly adhering rust
- Quick recoat times, excellent recoatability
- Does not become brittle with age, resists mechanical damage
- pH range 3 to 11
|
- Excellent for garage and parking decks
- Can be used for truck bed liners
- Containment and secondary containment floors
- Material handling equipment
- Gravel guard application
- Can be used to repair or replace an existing membrane
- Roofing applications
- Pulp and paper mills
- Pipes
|
POLYFLEX 101645 SURFACE ACTIVATOR |
|
Polyflex 101645 Surface Activator is a specially formulated solvent blend designed to activate the membrane surface in order to acheive a better inter-coat adhesion.
| FEATURES |
RECOMMENDED USES |
- Fast Drying
- Single Component
- Easy to Apply
|
- Repair an existing membrane
- Overcoat existing membrane
- Incidental patching
- Surface cleaning
- Gun and tool cleaning
|
|
